PRODUCTS CENTER

Email:[email protected]

3 8 wp 20 bar 300 psi tank container discharge hose

150 PSI Tank Truck Hose - Max Industrial Solutions

150 PSI Tank Truck Hose ISO 9001 MFG. Suction and discharge of diesel fuel, oil and other petroleum based products with aromatic content up to 50%.

12 VDC EGP On-Demand Pump

exceed 200 psi (1.3 8 MPa, 13.8 bar) while pumping fluid. The pump design includes a self-contained pressure relief valve (C), Component Identifiion, page 7. When activated, the valve relieves pressure back to the tank. Mount Pump on Tank with Suction Tube 1. Install the bung adapter (15) in the tank bung and tighten. 2. Use a 3/4 in. (19 mm

Garden Hose Flow and Time Calculator

The pressure at the hose bib is assumed to be the dynamic pressure (while water is flowing) not the static pressure (no water flowing). Note that at high flow rates the dynamic pressure at the hose bib often drops because of internal pressure losses in the water delivery system. The assumed C factor (internal to the equation constant) is 135 for flexible garden hoses.

Rubber Hose - Brierley Hose & Handling

mining air-water delivery 20 bar (300 psi) - fras exceeds as 2660/b t-240 aa tube : black conductive sbr/nr reinforcement : high tensile textile cords cover : black condutive sbr - abrasion, ozone, and fire resistant appliion : air, water and stone dust delivery in underground mines. safety factor : <= 63mm 4:1 76mm-102mm 3.5:1 152mm 3:1

Industrial Hoses < Fluid Handling < Products & Solutions

Material Handling, Dredge & Mining Hoses. Continental hoses are frequently used in above-ground and underground mining appliions, in offshore technology, in material handling, large-tank units, the ironworks industry, and the building trade.

Sail Emarate - Leading traders and suppliers of Hoses

Water Suction & Discharge Hoses 20 Bar W.P 300 PSI. Read more; Water Suction & Discharge Hoses 10 Bar W.P 150 PSI. Read more; Fire Sleeve Hose - RED. Read more ‹ › WELCOME TO SAIL EMARATE PIPES TRADING LLC. Traders & Suppliers of Hoses, Hydraulic fittings, Clamps etc. Welcome to the World of High Pressure Hydraulic / Thermoplastic and all kinds of industrial hoses. We, SAIL …

Hose | Parker NA

Parker offers the widest range of specialty, industrial, hybrid and hydraulic hose in the industry. Our comprehensive line includes low pressure, medium pressure and high pressure pneumatic and hydraulic hoses that are resistant to heat, ozone, weather, chemicals, oil, flames, UV and abrasion. Parker is the largest hose manufacturer in the world and provides an engineered solution to all of

Hosecraft USA Discharge Hoses and Lay Flat Hoses of Every

PD2 PVC HEAVY DUTY LAFLAT DISCHARGE HOSE PD2 is a red PVC discharge lay-flat hose that resists kinking and twisting. It is designed as a heavy duty hose for water discharge in industrial and construction appliions, is strong and rolls up flat for easy storage. 1-1/2" to 8" diameters. 5F to 130F.

Goodall Air hoses - Goodall Hoses; Intelligent Hose Technology

20 bar. 300 psi. -40°C to + 95°C. -40°F to +203°F. Premium high quality hose for air tool appliions on construction sites. Tough, durable and ready for the hard work. Can also be used as in-plant air and water hose. Also available in red, blue and green cover.

Fabric braided rubber hose Manufacturers & Suppliers

Hot Sale Wp. 20 Bar 300 Psi Fabric Braided Rubber Air Hose. Hot Sale Wp. 20 Bar 300 Psi Fabric Braided Rubber Air Hose Inquiry Basket. Hebei Wanlitai Olive Pipe Co., Ltd. Favorites Supplier. Diamond Meer Suppliers with verified business licenses. 5.0 Audited Supplier Business Type: Manufacturer/Factory Main Products: PVC Pipe , Silicone Hose, Ductile Iron Pipe , Rubber Dredge …

Hydraulic Hoses, Industrial Hoses, Fire Hoses, Water Hoses

JGB Enterprises, Inc. is a hose asseler of hydraulic and industrial hoses and hose asselies for all appliions. We assele a full line of specialized hoses and fittings, including hydraulic hose, water hose, flexible hose, special appliion hose, and braided hose. JGB Enterprises has long standing relationships with over 1500 vendors.

Water Hoses - Grainger Industrial Supply

Water suction and discharge hoses are built for pumping or vacuuming water. Pressure washer hoses can convey pressurized jets of water for power washing surfaces. Water supply hoses and connectors connect a building''s water supply lines to appliances and other equipment. View More. Filter. Done. Purchased products. Sign In to view purchased products. Search within results Hose Inside Dia

Pin on Industrial Hose Supplier

Dec 16, 2019 - Supply PVC Water Sullage Hose; Appliion: Watering parks/gardens with grey water; Tube: PVC, Cover: PVC; WP: 145 psi; Special Features: UV stabilized

Hose Technology - HANSA-FLEX

(hose fittings for NY 300 hoses) Metric series Page 388 BSP Page 393 NPT Page 395 JIC Page 397 Flanges Page 399 French series Page 405 2. Hose fittings. 7 Table of contents Quick release couplings Sleeves Page 444 Fixed halves Page 446 Loose halves Page 447 Accessories for fixed halves Page 448 Accessories for loose halves Page 449 Spare parts for fixed halves Page 450 Spare parts for loose

Sridhar Engineering & Rubber Products Pvt.Ltd.

Hose ID mm: Mean OD mm : Max. WP ( Bar - PSI) Min.BP (Bar - PSI) M-ABH-18: 1 1/8" 28.58: 47.00: 200-14: 1000-70: M-ABH-20: 1 1/4" 31.80: 50.00: 200-14 : 1000-70: M-ABH-22: 1 3/8" 35.00: 54.00: 200-14: 1000-70: Hand-Built Hose: Aviation Hose (Meets BS EN 1361 & API 1529 Type C) Construction : Tube: Black, resistant to aviation fuel, nitrate rubber, Reinforcement: Braid of High tenacity

Import Data and Price of psi bar under HS Code 4009 | Zauba

Port of Discharge Unit Quantity Value (INR) Per Unit (INR) Nov 17 2016: 40092100: RUBBER HYDRAULIC HOSE: SEMPER PILOT DN 10 3/8 WP 125 BAR 1800 PSI 3/8 (1050.40 MTR - 189.07 KGS) Thailand: Nhava Sheva Sea: KGS: 189: 80,323: 425: Oct 15 2016: 40092100: HOSE- STEAM 18 BAR(261 PSI)-210 C 410 F-016 DN 025 5/8 ALFAFLEX-RED: Italy: Vizac Sea: MTR: 60: 11,603: …

Compute time to Drain or Empty a Tank, Pond, or Reservoir

Our steady state discharge from a tank page lists discharge coefficients for some orifice shapes (for water and similar liquids) from Dally et al. (1993), and they are repeated here. Similar values are shown in Daugherty et al. (1985, p. 415). Type: Rounded Sharp-edged Short tube Borda C: 0.98 0.61 0.8 0.51 . The short tube value is valid for L ~ 2.5d. Borda is also known as "re-entrant" since

SHURFLO AQUA KING™ II STANDARD 3

Control: Shut-Off 55 PSI [3.8 Bar] ± 2 PSI [0.13 Bar] Re-start 40 PSI [2.8 Bar] ± 2 PSI [0.13 Bar] 300 liter tank = 300 milliliters of bleach. 2. Mix the bleach with water in a container such as a gallon jug. If tank is filled through a pressurized fitting, pour the bleach into the hose before attaching the hose to the city water entry. 3. Pour the bleach solution into the tank and fill

Chapter 3 • Integral Relations

The hose diameter (5 in) would establish a hose average velocity of 9.8 ft/s, but we don’t really need this. Go directly to the volume flow: 3.5 A theory proposed by S. I. Pai in 1953 gives the following velocity values u(r) for turbulent (high-Reynolds nuer) airflow in a 4-cm-diameter tube: r, cm 0 0.25 0.5 0.75 1.0 1.25 1.5 1.75 2.0 u, m/s 6.00 5.97 5.88 5.72 5.51 5.23 4.89 4.43 0.00

Argonite - Kidde-Fenwal, Inc.

discharge outlet, connected by a discharge hose, to the distribution piping. The actuator operates on a 1 to 10 ratio requiring only 300 PSI (21 bar) for the 2900 PSI (200 bar) system to operate the valve. The following are the connections pro-vided on the valve. Figure 2. Cylinder Dimensions Table 3. Cylinder Dimensions Size Fill

INDUSTRIALES.ar

fuel & oil hose 20 ma0172 auto tank suction & discharge hose ma0192 super auto tank suction & discharge hose ma0193 fuel & oil suction / discharge hose 10 ma0194 fuel & oil suction / discharge hose 10* ma0195 fuel & oil suction / discharge hose 16 ma0196 dock oil suction / discharge hose 10 ma0510 dock oil suction / discharge hose 15 ma0520 aircraft refueling en 1631 tyoe-b ma0160 …

Flow Rate Calculator - Calculate the flow rate of a pipe

If the head is given in metres of water, each 1-metre head (3.28 ft) induces 0.1 bar (1.47 psi.) pressure. All formulae for finding the amount of fluid that will flow through a hose at a given time, are approximate. The graphs above are generated from calculations assuming the hose to be in good condition and laid in a straight line. With this

The Flow Rate of a Garden Hose Explained - Swanhose

The most common garden hose diameters are 1/2, 5/8 and 3/4 inches. The garden hose that you are using right now is probably one of these dimensions. What you need to understand here is that a smaller-diameter hose will deliver fewer GPM. When using a smaller hose, you will limit the amount of water than can be directed to your garden within a minute or an hour. Garden Hose Water Pressure Most

NPT Fittings | High Pressure Company

psi: connections: a: b: length: hex size: 15-21nmanma: 15000: 1/8” male npt x 1/8” male npt: nma: nma: 1 3/4" 1/2" 15-21nn : 15000: 1/4” male npt x 1/4” male npt: n: n: 1 7/8" 5/8" 15-21nmcnmc: 15000: 3/8” male npt x 3/8” male npt: nmc: nmc: 2" 3/4" 15-21nmdnmd: 15000: 1/2” male npt x 1/2” male npt: nmd: nmd: 2 1/8" 1" 10-21nmfnmf: 10,000: 3/4” male npt x 3/4” male

Flow of Liquids from Containers - Volume Flow and Emptying

C d = discharge coefficient . where . C d = C c C v . where . C c = contraction coefficient (sharp edge aperture 0.62, well rounded aperture 0.97) A = area aperture (m 2) Example - Volume Flow when draining a Container. The height from the surface to the outlet aperture in a water filled container is 3 m. The aperture is sharp edged with diameter 0.1 m. The discharge coefficient can be

INDUSTRIAL HOSE

Dash Inch Dn Inch mm psi bar psi bar inch mm lbs/ft Kg/mt 12 3/4 12 HBR4-12 1-13/50 32 300 21 1,200 84 2.17 55 0.47 0.70 16 1 25 HBR4-16 1-1/2 38 245 17 980 68 2.95 75 0.60 0.90

Link to Master Table of Contents Rubber Hose Link to

213-16 7/8 22 1.21 31 400 2,8 3-1/2 90 213-20 1-1/8 29 1.49 38 300 2,1 4-1/2 115 213-24 1-3/8 35 1.73 44 300 2,1 7-1/2 190 213-32 1-13/16 46 2.14 54 200 1,4 14 355 213-40* 2-3/8 61 2.88 73 175 1,2 24 610 * NOTE: Due to fitting size, this is a factory crimp only. Pneumatic/Hydraulic Hydraulic Link to Master Table of Contents Link to Section

Parts2O FP2731 2-Inch Heavy Duty Discharge Hose

B E Pressure WP-2070S 2" Water Transfer Pump, 158 GPM, 7 hp . 4.0 out of 5 stars 2. 4 offers from $279.02. Superior Pump 99622 Lay-Flat Discharge Hose Kit, 2-Inch by 25-foot (4-Piece) 4.4 out of 5 stars 1,398. 4 offers from $25.30. Abbott Rubber PVC Discharge Hose Assely, Blue, 2 in. Male X Cam and Groove, 65 psi Max Pressure, 50 ft. Length, 2 in. ID. 4.2 out of 5 stars 46. 6 offers

20’ TANK CONTAINER STANDARD SPECIFIION MODEL …

Vacuum Pressure 0,4 bar 5,8 psi Steam Heating Maximum Allowable Working Pressure 7,0 bar 101,5 psi Test Pressure 10,5 bar 152,25 psi 1.8 Material of Construction Framework EN 10210-1 S355 J2H (Hollow section) 50D or Equivalent (Tested to -40°C) Corner Castings ISO Standard 1161 Shell DIN 171441 W1.4401 Low Carbon C ≤ 0.03% Cold Rolled 2B (ASTM A 240-93B, 316) Heads (Coluus …

Oilfield - Gates

OILFIELD. Despite the severe demands of today’s drilling industry, downtime, leaks, and mistakes are not an option. That’s why we engineer our premium land and offshore drilling, tank trunk, and fracking oilfield appliion hoses and asselies with cutting-edge technology, and test each component against the most stringent standards in the industry.