PRODUCTS CENTER

Email:[email protected]

sae100r1at 1 4 wp 2750 psi industrial hose and fittings

Hose | Parker NA

Parker offers the widest range of specialty, industrial, hybrid and hydraulic hose in the industry. Our comprehensive line includes low pressure, medium pressure and high pressure pneumatic and hydraulic hoses that are resistant to heat, ozone, weather, chemicals, oil, flames, UV and abrasion. Parker is the largest hose manufacturer in the world and provides an engineered solution to all of

BIS Valves Products - Trident Australia

BIS Valves Type F25 series in-line filter, 12,000 psi max WP-liquid,10,000 psi max WP-Gas), 5 micron element, 1/4 inch NPT ports, 316SS with Brand: BIS Valves Lead Time: 35 days

SAE100R1AT / EN8531SN | OrientFlex

SAE100R1 steel wire reinforced hydraulic hose is suitable for hydraulic hose and usual industrial systems. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover. The tube is made from oil resistant synthetic rubber, making the hose have excellent performance in

Aeroquip GH793 Double Wire Braid Hydraulic Hose

Construction. Synthetic rubber tube, double wire braid reinforcement and DURA-TUFF™ synthetic rubber cover. Appliion. Hydraulic system service with petroleum and water-base fluids, for general industrial service. Operating Temperature Range. -40°F to +260°F (-40°C to +127°C) Meets or exceeds: SAE 100R2AT Type S, EN 853 2SN, ISO 1436-1

Dunlop Hiflex is one of the market’s most established

of hydraulics hoses and couplings, industrial hoses and fittings. The manufacturing of hoses and couplings, for both high and low pressure, gives Dunlop Hiflex extensive knowledge of the products and enables it to put forward suggestions for new solutions and enhancements to industry.

Hydraulic Hose Selection Guide

4 Hydraulic Hose Selection Guide NRP Page Nuers Dash Size and W orking Pressure Industry Part Specifiions No. Construction Hose Fittings -3 -4 -5 -6 -8 -10 -12

Products & Components for Creating Motion & Flow

We have been solving hydraulic and pneumatic challenges for over 60 years! Many of our Technology Managers, engineers, and leaders previously worked for leading motion and flow product manufacturers like Parker Hannifin. We know our products, and we understand your industry. Take advantage of our expertise, we will be thrilled to help you!

SAE 100R1AT Hydraulic Hose

SAE 100R1AT Hydraulic Hose, One Wire Braid Hydraulic Hose. Up to 2,750 PSI Max in 1/4 size. 4:1 safety rating on all R1 hoses

What is the HS Code for Bull Plug Male 2 Inch FIG 1502 1-2

2" FIG602 Bull Plug with 1/4" NPT, WP 6000 Psi 3" FIG1002 Male Bull Plug with 3/8" NPT, WP 10000 Psi. 3" FIG1002 Bull Plug with 1/2" NPT, WP 10000 Psi 4" FIG1502 Male Bull Plug with 1/4" NPT, WP 15000 Psi. 4" FIG1502 Bull Plug with 1/4" NPT, WP 15000 Psi Call PME Industrial, you will get response instantly! PME Sales Team. Tel: +86 21 5837 2350. Cell/WhatsApp: …

petroleum hose puma - allevamentopuliti

teflon hose eaton puma. Hose Fittings: Superior Industrial Supply: Saint 2015-11-5Superior Industrial Supply carries a full inventory of American and metric hydraulic, pneumatic and industrial hose and fittings from leading manufacturers including Eaton Weatherhead, Eaton Boston, Eaton Everflex, Parker, Gilmour, Kuriyama, Snap-Tite and many others.

metal corrugated air compressor flexible hose

CORRUGATED STAINLESS STEEL HOSE - Flexline … Nominal Inside Diameter Hose Type Outside Diameter Bend Radius Constant Flexing Bend Radius Static Bend Maximum Working Pressure Burst Pressure @70 F 1/4” H1-4 0.57 5 2.5 2562 10250 H2-4 0.64 4099 16400 3/8″ …

EN 853 2SN High Pressure Hydraulic Hose Assely with

Hydraulic Hose SAE 100 R2 AT / EN 853 2SN with Ferrules and Fittings: Plant of Hydraulic Hose: Appliion of Hydraulic Hose: MSHA Approved Continental Industrial Hose Flame Resistant EN853 1SN 2SN. SAE100r1at / 1sn Dn19 High Pressure Hydraulic Hose , Wire Braided Rubber Hose . Smooth Surface 10000 Psi 3/8" Hydraulic Jack Hose For Propping System. SAE 100R1AT/1SN Dn25 1" High …

Paint Spray Hose | OrientFlex

Each of our high pressure flexible hoses assures compatibility with all finishing equipment sprayers. Higher burst pressures allow you to safely work within the surface treatment industry at recommended working pressures. Airless Paint Spray Hose Characteristics. Available in 3/16″, 1/4″ and 3/8″ with working pressure to 3500 PSI

SAE100R1AT/EN853 1SN

Appliion Fields: Mine hydraulic support, oilfield extraction machinery, mine/road/construction machinery. Inner Tube: oil resistant synthetic nitrile rubber Reinforcement: single layer of steel wire braided Cover: Black, oil resistant, synthetic rubber Surface: wrapped surface,smooth surface Temperature Range: -40℃(-104℉) to +100℃ (+212℉)

Hose, Fittings and Equipment PHOSPHATE ESTER LOW

Hose, Fittings, and Equipment Hose Size Hose Reinforcement Standard Temp. Range °F SAEISO EN –4–5 –6 –8 –10 –12 –16 –20 –24 –32 –40 –48 Hydraulic BXX 5000 4000 3500 2750 2250 2000 –40/+212 100R2 701 6500 6000 5000 –40/+212 3862-1-4SP 856-4SP 731 6000 5500 4700 4200 3600 –40/+212 3862-1-4SH 856-4SH Suction & Return

Rubber Hydraulic Hose Supplies - SAE 100R2 AT Fittings

R2-3/4. SAE 100R2 AT. $2.40. R2-1. SAE 100R2 AT. $3.00. Check the items you wish to purchase, then click.

421FS Hose - MFCP

Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assely failure. Hose assely failures have lead to damage, injury and death.

SAE100R14

Item Code: ID. OD. WP. BP. VACUUM. R. KG. Inch: mm (inch) (psi) (psi) (inch/Hg) (inch) (Lbs) TR14-3: 1/8” 3.2: 0.25: 3500: 14000: 29.9: 1.5: 0.051: TR14-6: 1/4” 6

wp mpa 4000 psi b p 3000psi pressure hose mask

wp mpa 4000 psi b p 3000psi flexible hose pipe for oil and steam. Pressure Ratings of Steel Pipe Based on ASTM A53 Grade B or A106 Grade B … Pressure Ratings of Steel Pipe Based on ASTM A53 Grade B or A106 Grade B Seamless ANSI 831.1, 1977 with allowances for connections and fittings reduces these working pressures approx. 25% PIPE PRESSURE-PSIWATER PRESSURE-PSIPIPE NOM.

PME News Update Sept, 2019: Grade E Rotary Hoses, 3-1/2

PME Industrial high pressure drilling hoses, size in 3-1/2", working pressure 7500 psi, test pressure 11250 psi, working temperature - 20 degree to +121 degree as API 7K standard, FSL 2 have been packaged well and delivered to warehouse in Shanghai Port, China.

Hydraulic Hose | SAE 100R1AT | EN 853-1

Material: acrylonitrile butadiene rubber (inner tube), 1 steel wire braid, synthetic rubber (outer cover) Conforms to SAE 100R1AT, EN 853-1, and DIN 20022. Operating pressure up to 250 bar. Available from 3/16" to 2". Operating temperature: -40°C to 100°C.

Products - Trident Australia

Trident Australia. 22-24 Wittenberg Drive, Canning Vale, WA 6155 ABN 24 079 789 852 Phone +61 8 9456 1300

SAE 100R7 DIN EN 355 Thermoplastic Hydraulic Hoses

1/4" SAE 100R7 Thermoplastic Hydraulic Hose - 3,000 PSI (Sold per foot) quantity. Add to cart. 1-4-0 : 3/8" SAE 100R7 Thermoplastic Hydraulic Hose - 2,250 PSI (Sold per foot) R706 $ 3.81 $ 2.71: Quick View: 3/8" SAE 100R7 Thermoplastic Hydraulic Hose - 2,250 PSI (Sold per foot) quantity. Add to cart. 3-8-06: 1/2" SAE 100R7 Thermoplastic Hydraulic Hose - 2,000 PSI (Sold per foot) R708 $ 4.11

421SN-6 - No-Skive Medium Pressure Hose 421SN, 421TC

No-Skive Medium Pressure Hose 421SN, 421TC, 421RH , 421WC. According to EN 853 1SN - ISO 1436 Type 1. Working pressure: up to 22,5 MPa and a temp. Range: -40 °C up to +125°C. Compatible with No-Skive fittings in steel and stainless steel.

R1T Wire Braid Reinforced Hose - Powertrack

Part Nuer: Hose I.D. (in) Hose O.D. (in) W.P. (psi) B.P. (psi) Bend Radius (in) Approx Weight (lbs/ft) R1T-04: 1/4" 0.557" 2750: 11000: 4.00" 0.14: R1T-05: 5/16"

Hydraulic Hoses, Industrial Hoses, Fire Hoses, Water Hoses

JGB Enterprises, Inc. is a hose asseler of hydraulic and industrial hoses and hose asselies for all appliions. We assele a full line of specialized hoses and fittings, including hydraulic hose, water hose, flexible hose, special appliion hose, and braided hose. JGB Enterprises has long standing relationships with over 1500 vendors.

Flexible Hydraulic Hose Products, Industrial Hose & Fittings

We have the largest selection of hydraulic hoses and industrial hoses, hydraulic hose fittings and hose configurations to efficiently meet all our customers'' needs. We are the leading manufacturer of rigid and flexible hoses, asselies, fittings and crimping technology for both the industrial and hydraulic hose markets. Our division headquarters in Wickliffe, Ohio, is our precision-engineered

SAE 100R1 AT / DIN20022 EN 853 1SN-Hydraulic hose--Hebei

SAE 100 R1 steel wire reinforced hydraulic hose is suitable for hydraulic hose and usual industrial systems. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover. The tube is made from oil resistant synthetic rubber, making the hose have excellent performance in

Air hose/Water hose - Hengshui Xinliyuan Technology Co

Hydraulic Hose, Industrial Rubber Hose, Thermoplastic Hose manufacturer / supplier in China, offering 1 2 Inch High Pressure SAE 100 R3 Wrapped Surface Oil Hydraulic Rubber Hose, Excellent Material Supply R2 Hose of 3/8 Inch Hydraulic Rubber Hose, An20 High Quality Fittings and Stainless Steel Braided Rubber Oil Cooler Hose and so on.

Steel Braided Hose | Hydraulic Hose | Hydraulics

There is 1 Metre in a metre. In Stock. Low Stock Out Of Stock Please See Attributes. 338.82. Increase value Decrease value. 1SN8 HYDRAULIC HOSE R1AT 1/2 (SAE100R1AT) WP 2000 PSI. $13.65. $1433.25. Per MTR inc GST.